Skip to content
775 654 443 CS
Home / Blog / Broken window: what to do before the glazier arrives

16 November 2026

Broken window: what to do before the glazier arrives

A broken pane is unpleasant mainly because it has to be dealt with at once and cannot be dealt with at once. This text covers what you can do yourself in the first half hour, and what to have ready so the glass replacement happens in one go.

A window frame during repair and glass replacement

1. Safety first, glass second

Do not pull shards out of the frame with bare hands, even if they look like they are holding. Glass keeps cracking and the edge is sharper than it looks. If there are children or pets in the house, close the room before you start clearing anything.

Large pieces still loosely held in the frame are better left in place and secured than levered out. A falling pane is more dangerous than a cracked one.

2. Clearing the shards

Large pieces carefully into a rigid box or a double bag, not an ordinary carrier bag. Small fragments and dust are best vacuumed, then wiped again with a damp cloth or paper towel, because microscopic pieces stay behind on a surface that looks clean. Throw the cloth away afterwards; do not rinse it out.

3. Covering the opening temporarily

The aim is to keep out rain, wind and intruders, not to build a replacement window. In practice the usual options are:

  • a firm board (plywood, chipboard, a single-use sheet of cardboard) fixed around the frame,
  • heavy construction sheeting taped all the way round so the wind cannot lift it,
  • for a cracked but intact pane, tape on both faces. It reduces the risk of the glass collapsing when the sash is closed.

Sheeting and boards are not security. On a ground floor or at an accessible window it makes sense not to leave the flat unattended, and to mention that in the enquiry.

4. Work out what actually broke

One distinction matters for what comes next: whether it is single glazing or a sealed insulating unit. You can tell from the side of the frame, or from the reflection of a small flame. A unit shows two panes and a metal spacer between them.

This has a practical consequence. Single float glass is normally cut from a sheet in stock. An insulating unit is ordered from the factory, so the temporary cover has to last longer.

5. What to have ready for the enquiry

  • a photo of the whole window and a close-up of the frame,
  • approximate dimensions of the sash or the pane,
  • the frame material: timber, uPVC or aluminium,
  • the floor and whether the window can be reached from outside,
  • whether the opening is currently covered,
  • when you are at home so a survey can be arranged.

There is more detail on the page about window glazing and broken glass replacement, and on measuring in the article how to measure glass for a replacement.

6. What we do not promise

We will not claim someone will be with you within the hour. Whether and when a glazing firm in your area turns up is their decision and depends on what they are doing at the time. What we can promise is a quick reply and a clear answer if we have no partner in your area. Knowing that straight away beats waiting for someone who is not coming.

7. Insurance

If you are claiming for the broken glass, it is worth photographing everything before anything is cleared or covered. Insurers normally want to see the state before the repair and a document for the work carried out. Mention it in the enquiry too, so the firm knows a document describing the scope will be needed, not just an amount.

Frequently asked questions

Can I replace broken glass myself?

With single glazing in a small frame it is technically possible, but handling the pane and removing old putty are both jobs where cuts happen easily. With sealed units and large formats it is not sensible without suction cups and a second person.

How long does a temporary cover last?

Sheeting taped in place lasts days rather than weeks and works loose in wind. A firm board lasts longer. Either way it is a temporary measure and not a substitute for security.

Send us the glass sizes

An e-mail address is enough. Tell us what broke or what you need made, and add the dimensions even if they are only approximate.

  • Say what broke and on which floor.
  • Add a photo of the window; that helps most.
  • Mention whether you are making an insurance claim.

Only the e-mail is required. Fill in the phone number if you would like us to call.