Skip to content
775 654 443 CS

Glazing, glass and mirrors cut to size

Tell us what broke or what you need made. We pass the enquiry to a glazing firm that works in your area, and you get a written quote stating the glass type, the edge finish and the lead time.

A glazier scoring a sheet of glass with a glass cutter on a workshop bench

Glass is measured on site

The size for a replacement is taken once the glazing bead is lifted. Your photo and your own measurements are useful for orientation, not for ordering the pane.

You get the quote in writing

Glass type, edge finish, how it will be fitted and when. Not a single number in a text message that nobody can refer back to.

A glazing firm cuts and fits it

We pass the enquiry on. If we have no partner in your area, we say so straight away instead of leaving you waiting.

Four types of glass you choose between

This is the most common reason why two quotes for the same opening differ. It is not the price per square metre, it is the type of glass. The table says where each type is normally used and what to watch for when ordering.

Glass typeWhere it is normally usedHow it behaves when brokenWhat to ask when ordering
Float (ordinary sheet glass)Furniture infills, shelves out of reach, picture glazing, places with no impact risk.Breaks into long sharp shards.Whether it is acceptable at all in that place. Where impact or a fall is possible, a safety glass is normally required.
Toughened (tempered)Shower screens, glass doors, shelves, splashbacks behind a kitchen worktop.Shatters into small blunt fragments.That it can no longer be cut or drilled once toughened. Every hole, cut-out and chamfer has to be in the brief beforehand.
Laminated (safety glass)Balustrades, overhead glazing, places where the glass must not fall out once broken.Cracks but holds together on the interlayer.How many layers and which interlayer. For balustrades and overhead glazing this is normally set by the design, not by preference.
Insulating double or triple glazingWindows, balcony doors, glazed walls.Depends on which panes the unit is built from.Whether swapping the whole unit is enough, or whether the spacer bar has failed and the misting will come back.

What has to be used where is normally set by the standards and by the building design, not by a catalogue. We have the requirement for your particular place confirmed by the glazing firm. We deliberately give no thicknesses and no standard numbers here, because they vary with size, position and load.

How it works

Step 1

Send the enquiry

What broke or what you need made, approximate dimensions, which floor, and a photo if you have one.

Step 2

We fill in the details

We get in touch and ask about the frame type, access to the window and who will be there for the survey.

Step 3

Survey and quote

The glazier measures the glass on site. You then get a written quote with the glass type, the edge finish and the lead time.

Step 4

Making and fitting

The glass is cut and finished to size, then fitted and sealed. The firm normally takes the old material away.

Send us the glass sizes

An e-mail address is enough. Tell us what broke or what you need made, and add the dimensions even if they are only approximate.

  • The more precise your dimensions, the more concrete the first answer will be.
  • For broken glass, a photo of the whole window and a close-up of the frame helps.
  • You pay nothing for the enquiry and nothing for turning the quote down.
  • If we have no partner in your area, we will write and tell you.

Only the e-mail is required. Fill in the phone number if you would like us to call.

What drives the price of glass

You will not find a price list here, and that is deliberate: a glass price is made up of six to eight items and a table of prices per square metre shows one of them. These are the parameters that move the final figure most.

  • Glass type and thicknessFloat, toughened, laminated and an insulating unit are four different prices and four different lead times.
  • Size and shapeA large pane needs more people to handle it. A non-standard shape, an arch or a cut corner is made from a template.
  • Edge finishPlain cut, ground, polished or bevelled. A visible edge on a mirror or a shelf is treated differently from an edge hidden in a frame.
  • Holes and cut-outsEvery hole for hardware, a socket or a light fitting has to be drilled before toughening and raises the risk of a reject.
  • Surface finishAcid etching, sandblasting, back-painting on splashbacks, safety film.
  • Access to the siteA floor with no lift, a narrow staircase, fitting from the outside or from a platform. This often matters more than the glass itself.
  • Removal and disposalTaking the old glass out, removing the broken pieces and clearing up, plus temporary boarding where a pane is broken.
  • Lead timeOrdinary float glass tends to be in stock. Toughened glass and insulating units are made to order, which moves both the date and the cost of hurrying.

Frequently asked questions

How much does it cost to replace glass in a window?

We do not give a price here, because it would not be truthful. For the same size of opening the figure differs depending on whether it is single glazing or an insulating unit, whether the glass is fitted from the inside or the outside, and what condition the frame is in. You get a concrete figure in writing after the survey, with no obligation.

How long does glass cut to size take to make?

It depends on the type. Ordinary float glass is normally cut from a sheet in stock. Toughened glass, laminated glass and insulating units are ordered from the factory, so there is a wait. The lead time should be written in the quote before you confirm anything.

Can I measure the glass myself?

For a first estimate yes, and it helps a lot. For ordering the pane, no. The size is taken once the glazing bead has been lifted, it is measured in several places, and the glazier deducts an allowance for seating and expansion. Glass ordered from a measurement taken over the outside of the frame usually does not fit.

Misted double glazing: replace the glass or the whole window?

Misting between the panes means the spacer bar of the unit has failed. It is normally solved by replacing the whole insulating unit, while the frame, the hardware and the sill stay. Replacing the whole window makes sense when the frame or the hardware has failed too.

Do I need permission to replace glass?

For a glass replacement in a flat or a house, normally not, because neither the appearance nor the structure changes. It can be different in a heritage zone, for shopfronts and for work affecting a facade. If that applies to your case, we have it checked with the firm before anything is ordered.

Will a glazier come out at night or at the weekend?

We do not promise a call-out in advance and we will not claim to be a round-the-clock service. Whether and when a glazing firm in your area turns up is their decision. What we can promise is a quick reply and an honest answer if we have nobody in your area. Until the glazier arrives, a board or strong sheeting usually helps to cover the opening temporarily.